XLNT 305C 1800W 305mm Sliding Mitre Saw

The XLNT 305C is a professional sliding mitre saw designed for accurate cross-cutting, angle cutting, furniture manufacturing, framing, carpentry, interior installation and regular workshop applications.

It is powered by a rated 1800W motor and delivers a listed no-load speed of 3800 RPM. The machine supports a maximum listed blade diameter of 305mm, providing the capacity required for compatible timber, boards, profiles, furniture components and framing materials.

The sliding rail mechanism allows the cutting head to travel across wider workpieces than a standard fixed-head mitre saw. Its rigid base, adjustable rotating table, rear material fence and protective blade guard support stable and controlled cutting.

The current page lists the product for carpenters, fabricators, interior contractors and workshop users. It also identifies wood cutting, aluminium equipment, angle cuts and frame or furniture work as intended applications.

Powerful 1800W Motor

The XLNT 305C features a rated 1800W motor designed for demanding woodworking and cutting applications.

It can be used for compatible:

• Timber cutting
• Wooden-board cutting
• Furniture manufacturing
• Door-frame work
• Window-frame work
• Interior installation
• Decorative profile cutting
• Workshop carpentry
• Framing applications
• Repetitive cross cuts

Actual cutting performance depends on the blade type, blade sharpness, material hardness, workpiece thickness and electrical-supply stability.

305mm Maximum Blade Capacity

The machine has a listed maximum blade diameter of 305mm.

A 305mm blade can provide increased cutting depth and cross-cutting capacity compared with smaller mitre-saw blades. However, the exact cutting capacity must be confirmed separately.

Before publishing the final listing, verify:

• Blade bore diameter
• Blade tooth count
• Maximum blade thickness
• Cutting capacity at 90 degrees
• Cutting capacity at 45 degrees
• Maximum cross-cutting width
• Maximum cutting depth
• Blade material
• Blade included in the package

Never fit a blade larger than the machine’s approved capacity.

Possible 40-Tooth Blade Specification

The supplied image displays the blade specification as “305M × 40.”

This may mean:

Blade Diameter: 305mm
Blade Tooth Count: 40T

Recommended temporary wording:

Blade Diameter: 305mm
Blade Tooth Count: Verify before publication

Do not describe the blade as having 40 teeth until it is physically checked.

Sliding Rail Cutting Mechanism

The product image shows a sliding rail assembly that allows the cutting head to move forward and backwards.

The sliding mechanism is useful for cutting wider materials such as:

• Wooden boards
• Furniture panels
• Shelving material
• Door frames
• Window frames
• Flooring sections
• Decorative mouldings
• Timber profiles

Keep the sliding rails clean and free from sawdust to maintain smooth movement and cutting accuracy.

3800 RPM No-Load Speed

The XLNT 305C has a listed no-load speed of 3800 RPM.

No-load speed refers to the blade speed when the machine is operating without cutting material.

Actual cutting speed may be affected by:

• Material hardness
• Material thickness
• Blade sharpness
• Blade tooth configuration
• Cutting pressure
• Cutting angle
• Voltage stability

Allow the blade to reach full speed before bringing it into contact with the workpiece.

230V, 50Hz Electrical Operation

The mitre saw operates on a listed 230V electrical supply at 50Hz.

Before operation, ensure that the electrical installation includes:

• Properly rated circuit breaker
• Suitable plug and socket
• Correct electrical earthing
• Adequate power-cable capacity
• Stable voltage supply
• Correctly rated extension cable
• Secure electrical connections

Avoid thin or excessively long extension cables because voltage drop may reduce performance and increase motor heating.

Precision Cross-Cutting

The machine is designed for clean and accurate cross cuts across compatible timber, wooden boards and profiles.

For better cutting results:

• Secure the material firmly
• Keep the workpiece against the fence
• Use a sharp and suitable blade
• Allow the blade to reach full speed
• Lower the cutting head smoothly
• Avoid forcing the blade
• Maintain stable support for long materials
• Wait for the blade to stop before raising the cutting head

Adjustable Mitre-Angle Cutting

The rotating base allows the operator to set suitable mitre angles for different woodworking applications.

Mitre cuts are commonly required for:

• Picture frames
• Door frames
• Window frames
• Furniture joints
• Decorative mouldings
• Skirting boards
• Cornice work
• Interior finishing
• Wooden trim installation

The exact mitre-angle range and positive-stop positions are not stated and should be physically confirmed.

Bevel and Compound Cutting Require Confirmation

The product image suggests that the cutting head may support bevel adjustment. However, the exact bevel range is not provided.

Confirm the following before advertising bevel capability:

• Maximum left bevel angle
• Maximum right bevel angle
• Single-bevel or dual-bevel operation
• Bevel-locking system
• Compound-cutting capability
• Cutting capacity at combined mitre and bevel angles

Do not advertise dual-bevel operation unless physically confirmed.

Rigid and Stable Machine Base

The mitre saw includes a wide base designed to support stable operation during cutting.

For improved safety and accuracy:

• Place the machine on a level workbench
• Bolt or clamp the machine where possible
• Support long workpieces externally
• Keep the base free from loose material
• Tighten all angle and sliding locks
• Avoid operating on unstable tables
• Keep the working area well lit

Rear Material Fence

The rear fence helps keep the material correctly positioned during straight and angled cutting.

The workpiece should remain firmly against the fence and saw table throughout the cut. Long, narrow or flexible workpieces require suitable external support.

Never hold small pieces close to the blade by hand.

Protective Blade Guard

The blade guard is designed to cover the cutting blade during normal machine operation.

Before every use, confirm that:

• The guard moves freely
• The guard returns automatically
• The mechanism is free from sawdust
• The guard is not cracked
• The blade does not touch the guard
• The guard has not been removed or modified

Never operate the mitre saw without the protective guard.

Suitable for Wood Cutting

The XLNT 305C is suitable for compatible woodworking materials such as:

• Natural timber
• Softwood
• Hardwood within machine capacity
• Plywood
• MDF
• Laminated boards
• Furniture panels
• Wooden profiles
• Decorative mouldings

The blade type and tooth count must match the material and required finish.

Aluminium Cutting Requires a Compatible Blade

The current product page lists aluminium cutting as an intended application. Aluminium profiles should online manufacturer permits it, and a suitable non-ferrous-metal blade is installed. For compatible aluminium cutting:

• Use an approved aluminium-cutting blade
• Clamp the profile securely
• Avoid cutting unsupported sections
• Follow the blade manufacturer‚Äôs instructions
• Wear eye and face protection
• Remove metal chips regularly
• Avoid using a normal wood blade unless specifically approved

Do not advertise the machine for steel cutting.

Suitable for Furniture Manufacturing

The mitre saw can support furniture-production applications such as:

• Wooden frames
• Cabinet components
• Table and chair parts
• Shelving
• Furniture mouldings
• Decorative profiles
• Panel framing
• Repetitive board cutting

Suitable for Framing and Interior Work

The adjustable cutting system makes the machine relevant for:

• Door-frame fabrication
• Window-frame work
• Skirting boards
• Decorative trims
• Wooden wall panels
• Flooring sections
• Furniture installation
• Interior finishing

Suitable for Professional Workshops

The 1800W motor, 305mm blade capacity and sliding mechanism make the machine suitable for regular workshop cutting applications.

The live page currently describes it as suitable for continuous workshop use. However, continuous-duty capability is claimed when the motor duty rating and recommended operating cycle are confirmed.

The current page lists a dust bag as included with the product. Confirm:

• Dust-bag connection size
• Dust-port diameter
• Vacuum-hose compatibility
• Dust-bag capacity
• Vacuum adaptor inclusion

Use workshop dust extraction whenever possible, especially when cutting MDF, plywood or treated timber.

Cutting Accuracy

Accurate cutting depends on proper machine setup.

Before beginning production work:

• Check blade alignment
• Check the fence alignment
• Confirm table-angle calibration
• Test the cut on scrap material
• Tighten all adjustment locks
• Check the blade for runout
• Confirm the workpiece is flat
• Use a suitable material clamp