XLNT XTMC122 1200W 110mm Marble Cutter

The XLNT XTMC122 1200W marble cutter is a compact electric cutting machine designed for marble cutting, tile installation, granite trimming, construction finishing and interior renovation applications. It supports a 110mm or 4-inch cutting blade and operates on a rated 220V, 50Hz electrical supply.

Its compact body, ergonomic upper grip and stable metal base are designed to provide better handling during straight cutting and finishing work. The current product listing positions the machine for tile workers, contractors, interior renovators and DIY users.

The package is listed with the marble cutter, a 4-inch cutting blade, a spanner tool and a user manual, providing the basic equipment required to begin compatible cutting work.

Powerful 1200W Motor

The XLNT XTMC122 is equipped with a rated 1200W motor for compatible marble, tile, stone and construction-finishing jobs.

Potential applications include:

• Marble cutting
• Ceramic-tile cutting
• Vitrified-tile trimming
• Granite-edge trimming
• Stone-slab preparation
• Interior renovation
• Floor-tile installation
• Wall-tile installation
• Construction finishing
• General masonry preparation

Actual cutting performance depends on the blade type, material hardness, cutting depth, power-supply stability and operator technique.

110mm or 4-Inch Blade Capacity

The machine supports a listed blade diameter of 110mm, commonly described as a 4-inch blade.

Use a blade specifically designed for the material being cut. Compatible blade categories may include:

• Marble-cutting diamond blades
• Tile-cutting blades
• Granite-cutting blades
• Continuous-rim diamond blades
• Turbo-rim blades
• Stone-cutting blades
• Compatible masonry blades

Never install a blade larger than the machine’s approved 110mm capacity.

The following blade information is currently missing and should be confirmed:

• Blade bore diameter
• Maximum blade thickness
• Maximum safe blade speed
• Included blade type
• Diamond-rim design
• Wet or dry application
• Maximum cutting depth

No-Load Speed Requires Verification

The supplied image states a no-load speed of 1,200 RPM, while the current product page states 12,000 RPM.

Recommended temporary specification:

No-Load Speed: Verify from physical machine rating plate

Until verified, avoid adding either speed to:

• Product title
• Meta title
• Product highlights
• Image text
• Structured data
• Paid advertisements
• Marketplace listings

The blade maximum permitted speed must always be equal to or greater than the machine's verified no-load speed.

220V, 50Hz Electrical Operation

The machine operates on a listed 220V electrical supply at 50Hz.

Before operation, ensure that the electrical setup includes:

• Suitable circuit breaker
• Properly rated plug and socket
• Correct electrical earthing
• Adequate supply-cable size
• Stable voltage supply
• Secure electrical connections
• Correctly rated extension cable

The rated input current is not supplied. Do not recommend a specific MCB, plug or extension-cable rating until the physical rating plate is checked.

Compact Cutting-Machine Body

The product page describes the XTMC122 as having a compact cutter body and lightweight construction for easier control.

The compact design supports use in:

• Tile-installation areas
• Bathrooms
• Kitchens
• Interior-renovation sites
• Construction-finishing work
• Small workshops
• Restricted working spaces
• Mobile installation jobs

Compact construction does not confirm the machine's exact weight. Add the net weight only after physical measurement.

Ergonomic Upper Grip

The upper handle is designed to provide controlled handling during cutting.

Inspect the handle regularly for:

• Cracks
• Loose fasteners
• Excessive movement
• Damaged grip surfaces
• Heat damage
• Oil or grease contamination

Maintain a firm grip and keep the machine's base flat against the material during cutting.

Low-Vibration Design

The product listing describes the machine as having a low-vibration structure for more comfortable handling.

Actual vibration may depend on:

• Blade balance
• Blade condition
• Spindle alignment
• Material hardness
• Cutting pressure
• Bearing condition
• Machine maintenance

Stop operation immediately if the machine produces unusual or excessive vibration.

Stable Metal Cutting Base

The machine includes a metal base intended to guide the cutter steadily across the workpiece.

For more accurate cutting:

• Keep the base flat against the material
• Support the material properly
• Remove loose dust from the cutting surface
• Use a straight guide where required
• Avoid lifting the base during cutting
• Do not twist the machine inside the cut
• Check the base for bending or damage

Suitable for Marble Cutting

The XTMC122 may be used for compatible marble-cutting and trimming work when fitted with a suitable diamond blade.

For cleaner marble cuts:

• Mark the cutting line clearly
• Support the slab evenly
• Begin with a shallow guide cut
• Allow the blade to reach full speed
• Maintain steady forward movement
• Avoid excessive pressure
• Keep the cutting base level
• Avoid twisting the blade

Suitable for Tile Cutting

The current product page lists tile cutting as one of the machine's main applications. 

For tile cutting:

• Use an appropriate continuous-rim blade
• Support the tile evenly
• Mark the required cut accurately
• Begin the cut slowly
• Reduce pressure near the tile edge
• Avoid sudden blade entry
• Test the blade on spare material
• Wear suitable eye and respiratory protection

Tile chipping depends on the blade, tile hardness, feed speed and workpiece support.

Suitable for Granite Trimming

Granite trimming is also listed as an intended application.

Use a diamond blade specifically rated for granite. Granite is generally harder than many marble and ceramic materials, so avoid forcing the blade through the workpiece.

Performance depends on:

• Diamond-blade quality
• Granite thickness
• Blade-rim design
• Cutting depth
• Feed speed
• Motor load
• Blade cooling
• Operator technique

Suitable for Construction Finishing

The XTMC122 can support compatible construction-finishing work such as:

• Tile-edge trimming
• Marble fitting
• Bathroom renovation
• Kitchen renovation
• Floor installation
• Wall-tile preparation
• Stone-edge adjustment
• Interior finishing
• Installation corrections

Check for concealed electrical cables and plumbing before cutting installed surfaces.

Concrete and Heavy Masonry Cutting

The available information does not provide a verified concrete-cutting capacity, cutting depth or continuous-duty rating.

Recommended wording:

Suitable for Limited Compatible Masonry Cutting with the Correct Blade

Do not market the XTMC122 as a replacement for a dedicated concrete cutter or wall saw.

Cutting-Depth Adjustment Requires Verification

The machine’s base and blade arrangement may support depth adjustment, but this is not confirmed by the supplied specifications.

Confirm:

• Whether depth adjustment is available
• Maximum cutting depth
• Minimum cutting depth
• Depth-locking mechanism
• Cutting depth at 90 degrees
• Depth scale availability

Do not publish an estimated cutting depth.

Bevel-Cutting Capability Requires Verification

The supplied information does not confirm whether the base supports angled cutting.

Before adding bevel-cutting claims, verify:

• Whether the base tilts
• Maximum bevel angle
• Bevel-locking mechanism
• Angle scale
• Cutting depth at maximum bevel

Do not advertise 45-degree bevel cutting unless physically confirmed.

Dry and Wet Cutting

The supplied image does not show a water-feed pipe, water inlet or wet-cutting attachment.

Recommended wording:

Dry Cutting: Suitable with the correct blade and dust control
Wet Cutting: Not confirmed

Never pour water directly onto an electric cutter unless the machine is specifically designed and electrically protected for wet cutting.

Dust Management

Marble, granite, tile and masonry cutting can generate fine dust.

Use:

• Suitable respiratory protection
• Approved eye protection
• Adequate ventilation
• Dust extraction where available
• Controlled cutting methods
• Regular cleaning of ventilation openings

Before publication, confirm whether the machine has:

• Dust-extraction port
• Vacuum adaptor
• Dust cover
• Compatible hose size
• Water-feed attachment

Regular Professional Use

The product page describes the machine as suitable for continuous finishing work.

This should be replaced with safer wording until the motor duty rating is confirmed:

Suitable for Regular Cutting and Finishing Work with Appropriate Cooling Breaks

Do not claim unlimited continuous operation without:

• Motor duty classification
• Maximum recommended operating time
• Required cooling intervals
• Thermal-protection details
• Manufacturer documentation

How to Use

• Inspect the machine, blade guard, power cable and cutting base.
• Confirm that the fitted blade suits the material.
• Check the blade‚Äôs maximum permitted RPM.
• Disconnect the machine before changing the blade.
• Tighten the blade correctly with the supplied spanner.
• Mark the cutting line clearly.
• Support and secure the workpiece.
• Connect the cutter to a correctly rated 220V supply.
• Hold the machine firmly.
• Start it away from the workpiece.
• Allow the blade to reach full speed.
• Guide the cutter steadily along the marked line.
• Avoid forcing or twisting the blade.
• Release the switch after completing the cut.
• Allow the blade to stop before placing the machine down.
• Disconnect the power before cleaning or adjustment.

Safety Instructions

• Wear approved eye protection.
• Use a face shield when required.
• Wear hearing protection.
• Use a respirator suitable for stone and silica dust.
• Wear suitable protective gloves.
• Use safety footwear.
• Keep hands away from the rotating blade.
• Never remove or modify the blade guard.
• Use only compatible 110mm blades.
• Confirm the blade‚Äôs maximum RPM rating.
• Inspect the blade for cracks or damage.
• Disconnect power before changing the blade.
• Secure the workpiece before cutting.
• Keep the power cable away from the blade.
• Do not operate the machine in rain.
• Do not use water unless wet-cutting compatibility is confirmed.
• Stop immediately if abnormal vibration occurs.
• Allow the motor to cool if overheating is noticed.
• Internal repairs should be completed by qualified technicians.

Maintenance Instructions

• Disconnect the machine before maintenance.
• Remove marble and tile dust after every use.
• Clean the ventilation openings regularly.
• Inspect the blade guard.
• Check the metal base for alignment.
• Inspect the power cable and plug.
• Check the switch operation.
• Tighten loose screws and fasteners.
• Replace worn or damaged blades.
• Inspect the spindle and blade flange.
• Check carbon brushes when applicable.
• Store the machine in a clean and dry location.
• Arrange professional servicing if abnormal noise, vibration or heating occurs.