XLNT 3000W High Pressure Washer for Vehicle and Outdoor Cleaning

The XLNT XTHPW196 3000W High Pressure Washer is a compact electric cleaning machine designed for washing cars, motorcycles, scooters, outdoor floors and other suitable washable surfaces. Its portable carry-handle construction and supplied cleaning accessories make it practical for home garages, vehicle-cleaning areas, workshops and outdoor maintenance tasks.

The machine operates on a rated electrical supply of 220V at 50/60 Hz. It has a listed power rating of 3000W, a maximum listed pressure of 300 bar and a listed water flow rate of 15 litres per minute.

This combination provides strong water delivery for loosening mud, dust and surface dirt when the correct spray distance and cleaning technique are used.

300 Bar Listed Pressure

The XLNT XTHPW196 has a listed maximum pressure of 300 bar.

High-pressure water can help remove stubborn surface dirt from compatible areas. Actual pressure at the nozzle may vary according to:

• Water-supply condition
• Hose length
• Hose connection quality
• Nozzle condition
• Power-supply stability
• Inlet-filter cleanliness
• Operating distance
• Accessory configuration

Begin cleaning from a safe distance and gradually move closer only when necessary. Avoid concentrating the water jet continuously on one small area.

15 L/min Listed Water Flow

The machine has a listed water-flow rate of 15 L/min.

Water flow affects how quickly loose dirt and cleaning residue can be washed away. A suitable water source should be able to provide enough continuous water to support the machine during operation.

Insufficient water supply may cause:

• Interrupted water delivery
• Reduced cleaning performance
• Pump strain
• Air entering the inlet line
• Irregular spray output

Allow water to reach the machine before switching on the motor.

3000W Electric Operation

The XLNT XTHPW196 has a listed input power of 3000W.

It should be connected to an electrical outlet, wiring system and extension cable suitable for the machine’s power requirement. Undersized extension cables may cause voltage drop, cable heating and reduced performance.

Keep all electrical connections away from:

• Standing water
• Wet floors
• Direct spray
• Rain
• Damaged sockets
• Exposed wiring

Inspect the power cable and plug before every use.

Portable Carry-Handle Design

The pressure washer has an integrated upper carrying handle that helps users lift and reposition the machine.

Its compact horizontal construction makes it easier to store in a garage, utility area or workshop when not in use.

Switch off the machine, disconnect the power and release remaining pressure before carrying it. Do not lift the unit using the hoses or power cable.

Pressure Gauge

A pressure gauge is fitted near the pump assembly.

The gauge helps the operator observe the machine’s pressure condition during operation. It should be kept clean and protected from impact.

The available product information does not confirm a separate adjustable-pressure regulator. Avoid claiming that pressure can be manually adjusted unless the function is verified.

Spray Gun and Extension Lance

A high-pressure spray gun and extension lance are included.

The spray gun allows the operator to direct water toward the cleaning area while controlling the flow through the trigger. The extension lance helps maintain distance between the user and the high-pressure water outlet.

Before operation:

• Check the spray gun connection
• Secure the lance
• Inspect the trigger
• Confirm that the high-pressure hose is locked
• Point the lance away from people and animals
• Maintain a stable working position

Never leave a pressurised spray gun unattended.

Foam Bottle for Detergent Application

A foam bottle is included for applying compatible vehicle shampoo or cleaning solution.

Use only detergents suitable for pressure-washer application. Follow the chemical manufacturer’s recommended dilution ratio.

Avoid using:

• Thick undiluted chemicals
• Flammable liquids
• Corrosive acids
• Unapproved solvents
• Materials that can block the bottle or nozzle

After detergent use, rinse the foam bottle and run clean water through the system where appropriate.

Yellow Water-Inlet Hose

A yellow inlet hose is included for supplying water to the pressure washer.

The inlet hose carries water from the source to the machine. It should be attached securely using the correct connector.

Before starting:

• Check the hose for cracks or blockage
• Confirm the water source is open
• Remove sharp bends
• Ensure the connector does not leak
• Allow water to reach the pump

Do not operate the machine without an adequate water supply.

High-Pressure Outlet Hose

A black high-pressure hose is included for carrying pressurised water from the machine to the spray gun.

Inspect the hose before each use. Do not operate with a hose that is:

• Cut
• Cracked
• Bulging
• Kinked
• Leaking
• Damaged near the fittings

Keep the high-pressure hose away from vehicle tyres, sharp edges, hot surfaces and moving equipment.

Water-Inlet Filter

A water filter is included for the inlet connection.

The filter helps reduce the entry of visible dirt and particles into the pump. It should be inspected and cleaned periodically.

A blocked filter may restrict water supply and reduce cleaning performance. Always reinstall the filter correctly before operating the pressure washer.

Connectors and Adapters

Multiple connectors and adapters are supplied for assembling the inlet-water and pressure-hose setup.

Before switching on the machine, confirm that every connector is:

• Compatible
• Fully inserted
• Properly tightened
• Free from cracks
• Not leaking
• Correctly positioned

Avoid forcing incompatible fittings together, as this may damage the threads or seals.

Suitable for Car Washing

The XLNT XTHPW196 can be used for washing cars when operated carefully.

Recommended approach:

• Rinse loose dirt first
• Maintain a safe spray distance
• Use compatible car shampoo
• Avoid holding the jet on paint edges
• Keep pressure away from electrical components
• Rinse from top to bottom
• Avoid directing concentrated water at sensors and seals

Test the spray on a small, less-visible area before cleaning delicate surfaces.

Suitable for Motorcycle and Scooter Cleaning

The machine can also be used for compatible motorcycle and scooter cleaning.

Avoid directing high-pressure water toward:

• Wheel bearings
• Electrical connectors
• Instrument clusters
• Air intakes
• Chain seals
• Engine openings
• Exhaust outlets
• Decals at close range

Use a wider spray distance around sensitive parts.

Suitable for Outdoor Surface Cleaning

The pressure washer can be considered for cleaning compatible outdoor surfaces such as:

• Tiled floors
• Pathways
• Driveways
• Patios
• Boundary walls
• Garage floors
• Garden furniture
• Outdoor equipment
• Washable tools
• Suitable building surfaces

Always test the pressure on a small area first. High-pressure water may damage loose paint, weak plaster, soft wood, fragile tiles or deteriorated grout.

Safe Operating Guidance

Wear eye protection, closed footwear and suitable work clothing while operating the pressure washer.

Never direct the spray toward:

• People
• Animals
• Electrical outlets
• Live machinery
• The pressure washer itself
• Fragile glass at close range
• Exposed wiring
• Unstable surfaces

Switch off the machine, disconnect the power and squeeze the spray-gun trigger to release residual pressure before changing accessories or storing the unit.

Key Features

3000W listed input power

300 bar listed maximum pressure

15 L/min listed water-flow rate

220V rated voltage

50–60Hz rated frequency

Corded electric operation

Integrated carrying handle

Pressure gauge fitted

High-pressure spray gun

Extension lance

Foam bottle

Yellow water-inlet hose

Black high-pressure outlet hose

Water-inlet filter

Multiple connectors and adapters

Suitable for compatible vehicle cleaning

Suitable for washable outdoor surfaces

Compact portable construction