XLNT 1500W Electric Concrete Vibrator Machine with 2m Needle – XLV 232

The XLNT 1500W Electric Concrete Vibrator Machine XLV 232 is designed for professional concrete vibration and compaction work at construction sites. It features a listed 1500W electrical rating, 220V operation, 4300 RPM operating speed, 2-metre flexible needle and 35mm needle diameter.

The extended 2m flexible needle provides practical reach for suitable concrete-foundation, beam and structural-compaction applications. The machine is intended for contractors, concrete workers, civil-construction teams and equipment-rental businesses that require an electric concrete vibrator for freshly poured concrete. The live page specifically lists construction sites, concrete foundations and beam compaction as intended applications.

1500W Electric Concrete Vibrator Machine

The XLNT XLV 232 has a listed electrical rating of 1500W. This should be presented in the technical specifications as:

Rated Input Power: 1500W

The existing page calls it “Power Output,” but “Rated Input Power” is the safer catalogue term unless the manufacturer has separately supplied a measured mechanical-output value.

The 1500W electric motor is intended to power the connected flexible shaft and vibrator needle during suitable concrete-compaction work.

220V Electric Operation

The machine is listed for 220V electrical operation. Before use, confirm that the construction-site electrical supply, socket, extension cable and protective equipment match the machine’s rating.

The product page does not currently state the frequency, rated current, plug type or insulation class. These should be collected from the product rating label and added to the final specification table.

Listed 4300 RPM Operating Speed

The product page lists an operating speed of 4300 RPM. This is an important performance specification and should be included in the product title, features, specification section and image content.

However, the page does not clarify whether 4300 RPM refers to:

• Motor no-load speed
• Rated operating speed
• Flexible-shaft rotational speed
• Maximum motor speed

Until it is verified, use:

Listed Operating Speed: 4300 RPM

2-Metre Flexible Concrete Vibrator Needle

The XLNT XLV 232 is listed with a 2-metre concrete vibrator needle. The extended length provides additional reach compared with shorter-needle variants and can support suitable foundation, beam and structural concrete-compaction work.

The flexible shaft should be handled carefully during operation. Avoid sharp bending, crushing, twisting or pulling the machine by the shaft.

Use these product terms naturally across the page:

• Concrete vibrator needle
• Vibrator poker
• Concrete poker
• Flexible vibrator shaft
• Concrete compaction needle
• Needle vibrator machine

35mm Vibrator Poker Diameter

The live page lists a needle diameter of 35mm. This specification is especially useful for customers comparing replacement needles, concrete-vibrator sizes and application suitability.

The website should also clarify:

• Whether 35mm is the outside diameter of the poker head
• Needle-head length
• Flexible-shaft diameter
• Coupling type
• Compatible replacement needle sizes

Do not claim compatibility with other needles until the coupling and manufacturer specifications are confirmed.

Designed for Concrete Foundations

Concrete foundations are listed as one of the intended applications. The flexible needle is inserted into suitable freshly placed concrete to transmit vibration into the mixture during compaction work.

The correct insertion spacing, vibration duration and application method depend on the concrete mix, reinforcement arrangement, pour depth and construction requirements.

Suitable for Beam Compaction

The live page also identifies beam compaction as an intended use. The 2-metre flexible shaft can provide useful reach while compacting suitable freshly poured concrete in beam and structural formwork.

Care should be taken around reinforcement bars and formwork. Do not force or trap the vibrator needle between steel reinforcement.

Suitable for Construction Sites

The XLNT concrete vibrator is positioned for construction-site use. Potential users include:

• Building contractors
• Civil contractors
• Concrete workers
• Foundation teams
• Beam and column construction teams
• Site engineers
• Equipment-rental businesses
• RCC construction teams
• Maintenance and repair contractors

The machine should be operated by trained personnel familiar with electrical safety and concrete-vibration procedures.

Why Concrete Vibration Is Used

Concrete vibration is used during suitable freshly poured concrete work to help the mixture settle inside the formwork and around reinforcement.

Correct vibration can support more consistent compaction, but excessive or improper vibration may negatively affect the concrete placement. The operator should follow the project engineer’s directions and accepted site practices.

Extended Needle Reach

The 2-metre needle provides more working reach than shorter 1.5m variants. This can be useful when accessing suitable foundation, beam, column or deeper-formwork sections.

The actual effective insertion reach may be less than the total flexible-shaft length because part of the shaft remains outside the concrete and connected to the motor unit.