XLNT 21V Cordless Rotary Hammer XTCRH-131

The XLNT 21V cordless rotary hammer XTCRH 131 is a battery-powered drilling and chiselling machine designed for concrete, brick, masonry, installation and maintenance work. It delivers a listed 2.2J impact energy and a 1200 RPM no-load speed for professional cordless operation.

The XTCRH 131 is suitable for contractors, electricians, builders and maintenance teams who need mobility at construction sites or working locations where a nearby electrical socket may not be available.

2.2J Cordless Rotary Hammer Performance

The machine delivers a listed impact energy of 2.2 joules. This supports suitable concrete drilling, masonry drilling and controlled chiselling when the correct accessory and operating mode are selected.

The maximum drilling capacity and impact rate are not clearly published on the current product page. Confirm these values before comparing the XTCRH 131 with other 20mm, 24mm or 26mm rotary hammers.

1200 RPM Variable-Speed Operation

The XLNT XTCRH 131 has a listed no-load speed range of 1200 RPM. Controlled starting speed can help the operator position the bit accurately before increasing speed during suitable drilling applications.

Actual working speed will vary according to the selected mode, battery condition, drill-bit diameter, surface hardness and operator pressure.

Four Operating Modes

The current product imagery shows four selector positions intended for different drilling and chiselling requirements:

• Rotary drilling
• Hammer drilling with rotation
• Chisel-angle adjustment
• Hammer-only chiselling

Always allow the machine to stop fully before changing the operating mode.

Cordless Freedom for Construction Work

The 21V battery-powered design provides greater mobility for construction, electrical installation, plumbing, renovation and maintenance work. Cordless operation can be especially useful for elevated work, outdoor sites and locations where extension cables would be inconvenient.

Suitable Applications

• Concrete drilling after confirming maximum capacity
• Brick-wall drilling
• Masonry drilling
• Anchor-hole preparation
• Electrical installation
• Plumbing installation
• Tile and plaster removal
• Light chiselling
• Minor demolition work
• Construction-site maintenance

Adjustable Auxiliary Handle

The product imagery shows an adjustable auxiliary handle designed to support improved control from different working positions. Tighten the handle securely before starting the machine and maintain a stable two-handed grip during hammer drilling or chiselling.

Battery and Charger

The written product listing confirms that a battery and charger are included. Current product images show two batteries and identify a 4.0Ah battery capacity, but the final battery quantity and specification should be confirmed from the sealed package before publication.

Choosing the Correct Accessory

• Use a suitable masonry bit for concrete and brick drilling.
• Use a pointed chisel for controlled breaking and channel work.
• Use a flat chisel for suitable tile, plaster and surface-removal work.
• Confirm the tool-holder type before purchasing replacement bits.
• Never use damaged, bent or incorrectly fitted accessories.

How to Use the XLNT XTCRH 131

1. Charge the battery using the supplied charger.
2. Inspect the machine, battery and selected accessory.
3. Fit the correct drill bit or chisel securely.
4. Pull the accessory gently to confirm that it is locked.
5. Select the appropriate operating mode while the machine is stopped.
6. Adjust and tighten the auxiliary handle.
7. Hold the machine securely using both hands.
8. Begin at a controlled speed and maintain straight alignment.
9. Allow the hammer mechanism to work without excessive force.
10. Remove the battery before replacing accessories or cleaning.

Safety Instructions

• Wear safety glasses, hearing protection and a suitable dust mask.
• Check walls for concealed electrical cables, water pipes and gas lines.
• Use only compatible rotary-hammer drill bits and chisels.
• Do not change operating modes while the machine is running.
• Maintain secure footing and hold the machine using both hands.
• Do not force the tool when an accessory becomes jammed.
• Allow hot drill bits and chisels to cool before touching them.
• Remove the battery before inspection or maintenance.
• Do not expose the battery or charger to water.
• Stop operation if the machine overheats or produces unusual noise.

Package Contents

• 1  XLNT XTCRH 131 Cordless Rotary Hammer
• Battery
• Battery Charger

The written package list and product images do not currently agree. Confirm the battery quantity, 4.0Ah capacity, hard carrying case, auxiliary handle, drill bits and chisels before publishing the final package contents.