XLNT AT-22 5-Inch Pneumatic Sander with Hose

XLNT AT-22 Pneumatic Sander is an air-powered sanding machine designed for professional automotive, woodworking and metal surface-preparation applications. It features a listed 125mm sanding pad, 10,000 RPM no-load speed, 5mm orbit and 90 PSI operating-pressure requirement.

The package is listed with an air hose included, providing a convenient connection option for a compatible air compressor. Compressor compatibility must be determined using both working pressure and the tool’s required airflow, which should be verified before purchase.

10,000 RPM High-Speed Pneumatic Sanding

The XLNT AT-22 delivers a listed no-load speed of 10,000 RPM. This high operating speed supports efficient sanding and surface preparation when the correct abrasive, compressor output and operator technique are used.

Actual working speed may reduce under load depending on compressor airflow, hose diameter, regulator setting and applied pressure.

125mm or 5-Inch Sanding Pad

The machine uses a listed 125mm sanding pad, equivalent to approximately 5 inches. This common pad size provides practical surface coverage for automotive panels, furniture, timber boards and suitable metal components.

Confirm the backing-pad attachment system and dust-hole pattern before ordering replacement sanding discs. Matching the diameter alone does not guarantee compatibility.

5mm Orbit for Surface Preparation

The listed 5mm orbit supports balanced material removal and general surface-finishing work. It can be useful for preparing suitable surfaces before paint, primer, polish or coating.

The page does not confirm whether the mechanism is random orbital or dual action. These descriptions should be used only after checking the manufacturer’s technical information.

90 PSI Air-Pressure Requirement

The XLNT AT-22 has a listed operating-pressure requirement of 90 PSI. The connected compressor should maintain stable pressure while the sander is running.

Pressure alone is not enough to select a compressor. Verify the sander’s airflow consumption in CFM or litres per minute and select a compressor that can continuously supply the required volume of air.

Air Hose Included

The product specification lists an air hose as included. Confirm the hose length, internal diameter, connector type and working-pressure rating before publishing the final package details.

An undersized hose or restrictive fitting can reduce airflow and cause loss of sanding speed.

Lightweight Pneumatic Body

The product page describes the machine as having a lightweight pneumatic body designed to reduce operator fatigue. This can support improved control during repetitive workshop sanding and surface-preparation work.

The exact machine weight and dimensions should be added after physical verification.

Suitable Applications

• Automotive body sanding
• Primer and paint preparation
• Wood surface sanding
• Furniture preparation
• Metal surface preparation
• Removing suitable paint or coatings
• Workshop surface finishing
• Professional sanding applications

Automotive Sanding Applications

The XLNT pneumatic sander can be used for suitable automotive surface preparation, panel sanding and primer finishing when fitted with the correct abrasive disc. Use gradual grit progression and avoid excessive pressure that may create uneven sanding marks.

Wood and Furniture Sanding

The AT-22 can support wood and furniture sanding tasks such as surface smoothing, coating preparation and finishing. Select the abrasive grit according to the timber type, existing coating and required finish.

Test the selected abrasive on a hidden section before sanding the entire workpiece.

Metal Surface Preparation

The sander may be used for compatible metal preparation, paint removal and surface smoothing. Do not sand pressurised containers, fuel tanks or surfaces contaminated with flammable substances.

Choosing the Correct Abrasive Grit

• Coarse grit: For suitable coating removal and heavier surface levelling
• Medium grit: For general preparation and smoothing
• Fine grit: For primer sanding and finishing
• Very fine grit: For specialised refinishing applications

Begin with the least aggressive abrasive suitable for the job. An excessively coarse sanding disc may create deep marks and increase finishing time.

Air-Compressor Compatibility

Before selecting an air compressor for the XLNT AT-22, verify:

• Average air consumption in CFM
• Air consumption in litres per minute
• Required continuous compressor output
• Recommended compressor tank capacity
• Air-inlet thread size
• Recommended hose internal diameter
• Maximum permitted air pressure
• Pneumatic-tool lubrication requirement

A small compressor may reach 90 PSI but lose pressure rapidly during continuous sanding if it cannot supply enough airflow.

How to Use the XLNT AT-22 Pneumatic Sander

1. Inspect the machine, backing pad, sanding disc, hose and fittings.
2. Make sure the compressor is switched off before connecting the hose.
3. Install a compatible 125mm abrasive disc securely.
4. Connect the included hose using the correct air fitting.
5. Set the compressor regulator to the approved operating pressure.
6. Hold the sanding pad flat against the workpiece.
7. Operate the machine using light and even pressure.
8. Move continuously and avoid remaining in one area.
9. Disconnect the air supply before replacing abrasives.
10. Clean and lubricate the tool according to the manufacturer’s instructions.

Safety Instructions

• Wear safety glasses, hearing protection and a suitable dust mask.
• Use the machine in a well-ventilated working area.
• Do not exceed the approved air pressure.
• Never use a damaged hose, fitting, backing pad or abrasive disc.
• Secure the workpiece before sanding.
• Keep hands and loose clothing away from the moving pad.
• Disconnect the air supply before maintenance or accessory replacement.
• Do not direct compressed air towards people or animals.
• Use suitable dust extraction when sanding hazardous coatings or materials.
• Follow the verified lubrication schedule for the pneumatic mechanism.

Package Contents

• 1 √ó XLNT AT-22 5-Inch Pneumatic Sander
• 1 √ó Air Hose

Confirm whether the 125mm backing pad, air connector, abrasive discs, spanner or pneumatic-tool oil are included before adding them to the final package list.