XLNT 400A Industrial ARC Welding Machine ARC-400IC
Tap to see how your order reaches you.
How it works
Order confirmed and packed
We verify and pack your order within 24 hours of purchase.
Handed to our courier partner
Your order leaves our Chennai warehouse and begins transit to you.
Delivered to your door
Arrives in 3–7 working days depending on your location.
There may be some delay due to holidays or shipping provider delays.
Please record a continuous unboxing video.
How it works
Record an unboxing video
Film yourself opening the package, start before the seal is broken. Keep it continuous, no cuts.
Mail us the video
Spotted an issue? Email us at care@buyboxcorp.com with the video attached and your order number.
We review and exchange
Our team verifies the video and processes your exchange within 3–5 business days.
A continuous unboxing video helps BUYBOX verify transit damage, missing contents, wrong products or initial defects faster.
Key Specifications
Best For
Use Cases
In The Box
Key Informations
Warranty
Warranty
Product Description
Product Description
XLNT ARC 400IC 400A Industrial ARC Inverter Welding Machine
The XLNT ARC 400IC is a high-output industrial inverter welding machine designed for heavy-duty ARC welding, fabrication, maintenance and professional workshop applications. It provides a listed adjustable output-current range of 30-400A, allowing the operator to choose an appropriate current according to the electrode, base-metal thickness, joint design and welding requirement.
The machine operates on a listed 415V ±15% electrical input at 50/60Hz. It has a rated input current of 44.7A, a listed 60% duty cycle, 85% efficiency, 0.93 power factor, Class F insulation and IP21 housing protection.
The live product page identifies industrial welders, maintenance teams and fabricators as the main users and lists heavy-duty welding, maintenance work and fabrication jobs as its primary applications.
30-400A Adjustable Welding Output
The XLNT ARC 400IC provides a listed welding-current range of 30-400A.
The correct current setting depends on:
- Electrode diameter
- Electrode type
- Base-metal thickness
- Joint preparation
- Welding position
- Material condition
- Required penetration
- Electrical-supply stability
- Duty-cycle limitation
- Operator technique
The machine's supported electrode diameters and electrode types are not currently published. These should be confirmed before adding an electrode-selection chart.
400A Maximum Listed Welding Current
The machine is marketed as a 400A ARC welding machine, and the supplied specification image lists an output-current range reaching 400A.
Recommended catalogue wording:
Maximum Listed Welding Current: 400A
Do not claim continuous 400A welding unless the manufacturer supplies a duty-cycle chart that clearly states the allowable operating duration at 400A.
415V Industrial Electrical Input
The XLNT ARC 400IC requires a listed 415V ±15% electrical supply.
This voltage generally indicates an industrial installation, but the physical rating label must confirm whether the machine requires three-phase power before connection.
Before installation, verify:
- Phase configuration
- Input-cable size
- Earthing requirement
- Recommended MCB or MCCB
- Industrial plug and socket rating
- Isolation-switch requirement
- Power-cable length
- Maximum input current
- Supply voltage stability
This machine should not be connected to a normal 220V household socket.
Electrical installation should be completed or checked by a qualified electrician.
Rated Input Current of 44.7A
The supplied specification image lists a rated input current of 44.7A.
This is an important electrical installation specification. However, confirm whether 44.7A represents:
- Rated input current at maximum output
- Maximum input current
- Current drawn at the stated duty cycle
- Current per phase
- Current under a specified test condition
Do not recommend an MCB, MCCB or supply-cable size based only on this number without checking the physical rating plate and installation manual.
65V No-Load Voltage
The supplied specification lists a no-load voltage of 65V.
No-load voltage is present when the machine is switched on but an arc is not being produced. Operators must avoid contact with exposed terminals, electrode holders and conductive welding components while the machine is energised.
The rated output voltage is not stated and should be added after verification.
Listed 60% Duty Cycle
The XLNT ARC 400IC has a listed duty cycle of 60%.
Duty cycle indicates how long the machine may weld within a defined test period before cooling is required.
The available information does not state:
- The current at which the duty cycle was tested
- The ambient test temperature
- The applicable testing standard
- The required cooling period
Use:
Listed Duty Cycle: 60%
Do not publish “400A at 60% duty cycle” unless official documentation confirms that exact rating.
Listed 85% Efficiency
The welding machine has a listed efficiency of 85%.
This specification can be included in the technical table, but direct comparisons with other welding machines should be avoided unless all machines were tested under the same technical standard and conditions.
0.93 Power Factor
The ARC 400IC has a listed power factor of 0.93.
This is useful information for industrial electrical planning and should be retained in the product specifications.
Digital Welding Control Panel
The supplied product image appears to show a digital control panel with separate displays and adjustment controls.
Confirm whether the controls provide adjustment for:
- Welding current
- Arc-force setting
- Hot-start current
- Hot-start duration
- Electrode diameter
- Welding mode
- Error codes
- Thermal warning
Until the functions are verified, use the general wording:
Digital Welding Control Panel
Do not claim specific hot-start, arc-force or anti-stick functionality based only on the appearance of the control panel.
ARC and MMA Welding Applications
The machine is identified as an ARC welding machine. Confirm whether the manufacturer also officially classifies it as an MMA or stick welding machine.
If confirmed, suitable terminology may include:
- ARC welding machine
- MMA welding machine
- Stick welding machine
- Manual electrode welder
- Industrial inverter welder
Do not advertise MIG or TIG welding functionality unless separately verified.
Heavy-Duty Industrial Fabrication
The ARC 400IC is designed for higher-output fabrication and maintenance applications where a compatible industrial electrical supply is available.
Potential uses include:
- Heavy metal fabrication
- Machinery-frame welding
- Industrial maintenance
- Workshop production
- Equipment repair
- Structural component fabrication
- Construction-site maintenance
- Agricultural-equipment repair
- Industrial steelwork
Suitability depends on the electrode, material thickness, welding procedure, duty cycle and electrical installation.
Maintenance and Repair Welding
The live page lists maintenance work among the intended applications.
The adjustable output may support compatible repair work involving:
- Industrial equipment
- Machinery frames
- Metal structures
- Workshop fixtures
- Construction equipment
- Steel brackets
- Fabricated assemblies
Certified structural or safety-critical welding must follow an approved welding procedure and applicable inspection requirements.
Compact 16.5kg Industrial Body
The supplied specification image lists a machine net weight of 16.5kg and dimensions of 545 x 350 x 460 mm.
Although it is lighter than some transformer-based industrial welders, controlled lifting is recommended. Use the carrying handles correctly and consider two-person handling when moving the machine across uneven working areas.
Confirm whether the listed dimensions refer to:
- Machine dimensions
- Carton dimensions
- Shipping-package dimensions
IP21 Housing Protection
The welding machine has a listed IP21 protection rating.
IP21 does not mean that the machine is waterproof. Keep it protected from:
- Rain
- Standing water
- Direct water spray
- Wet workshop floors
- Damp storage
- Excessive grinding dust
- Conductive metal particles
Keep the ventilation openings clean and unobstructed during use.
Class F Insulation
The supplied specification lists Class F insulation.
This specification should remain in the technical table, but it should not be used to claim a particular maximum operating temperature unless the manufacturer provides supporting documentation.
Welding Accessories Require Confirmation
The supplied specification table does not list any included accessories. The live page only states ‚customizable accessories, which is too vague for a professional welding-machine listing.
Before publication, physically verify whether the package includes:
- Electrode holder
- Electrode-holder cable
- Earth clamp
- Earth-clamp cable
- Welding connectors
- Power cable
- Industrial plug
- Remote controller
- Welding mask
- Wire brush
- User manual
- Warranty card
Do not show any accessory as included until the carton is checked.
How to Use
- Place the machine on a stable, dry and well-ventilated surface.
- Confirm the input voltage and phase configuration from the physical rating plate.
- Ask a qualified electrician to verify the electrical connection.
- Inspect the power cable, welding terminals, electrode holder and earth clamp.
- Connect the earth clamp securely to clean, bare metal.
- Insert a compatible electrode into the electrode holder.
- Connect the machine to the approved 415V electrical supply.
- Select an appropriate welding-current setting.
- Wear approved welding personal protective equipment.
- Begin welding using the correct electrode angle and arc length.
- Monitor arc behaviour, cable temperature and machine temperature.
- Follow the listed duty-cycle limitation.
- Allow the machine to cool when required.
- Switch off and isolate the power supply after use.
Safety Instructions
- Use only with the correct verified industrial electrical supply.
- Electrical installation must be handled by a qualified electrician.
- Wear an approved welding helmet with the correct shade.
- Wear flame-resistant gloves and protective clothing.
- Use suitable safety footwear.
- Ensure adequate ventilation or welding-fume extraction.
- Remove combustible materials from the welding area.
- Never weld sealed tanks or pressurised containers.
- Inspect all electrical and welding cables before operation.
- Use proper electrical earthing.
- Keep the machine dry.
- Never touch exposed electrical terminals.
- Protect nearby workers from welding-arc radiation and sparks.
- Keep ventilation openings unobstructed.
- Follow the verified duty-cycle limitation.
- Disconnect the machine before inspection or servicing.
- Internal repairs must be completed by qualified service technicians.
Maintenance Instructions
- Keep the welding-machine body clean and dry.
- Remove dust from ventilation openings regularly.
- Inspect the input power cable and terminals.
- Check the electrode holder and earth clamp for damage.
- Inspect output connectors for looseness or overheating.
- Confirm that cooling fans operate correctly.
- Do not wash or submerge the machine.
- Store the welder in a dry and protected location.
- Arrange periodic professional servicing according to operating hours.
- Replace damaged cables and connectors with correctly rated components.
Shipping
Shipping
Seller Information
Seller Information
You might also like
Frequently Asked Questions
The machine has a listed adjustable output-current range of 30–400A. The correct current depends on the electrode diameter, electrode type, metal thickness and welding application.
The supplied specification lists a 415V ±15% input at 50/60Hz with a rated input current of 44.7A. Confirm the phase configuration and installation requirements with a qualified electrician before connection.
The XLNT ARC 400IC has a listed duty cycle of 60%. The specification does not state the welding current or test temperature at which the duty cycle was measured.
The machine is designed for heavy-duty welding, maintenance work and fabrication jobs. It is positioned for industrial welders, maintenance teams and professional fabricators.
- 5 stars: 21 (58%)
- 4 stars: 7 (19%)
- 3 stars: 8 (22%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Bought it for fabrication and repair work. Machine is portable. It saves time and feels suitable for the intended job. I used it across multiple routine jobs before forming this view.
Used it for workshop maintenance. The main function is fine, but heavy fabrication needs breaks. It suits normal work better than demanding continuous use. I used it across multiple routine jobs before forming this view.
We use this for light structural welding. Controls are simple. So far the performance has been consistent for normal use. I used it across multiple routine jobs before forming this view.
We use this for fabrication and repair work. Machine is portable. So far the performance has been consistent for normal use.
Fabrication and repair work vendi aanu mainly use cheyyunnath. Machine is portable. Normal workinu nalla convenient aanu, maintenance correct ayi cheythal performance nannayi kittunnu.
Bought it for light structural welding. Controls are simple. It saves time and feels suitable for the intended job.
Using this welding machine mainly for fabrication and repair work. Machine is portable. Overall it has been practical for regular work.
Tried it for fabrication and repair work. Machine is portable. The machine is straightforward to use and does the expected job.
I used this for normal day-to-day work. The main function is fine, but the supplied cables could be longer. For regular use it is still manageable.
Tried it for gate and grill welding. Output feels stable. The machine is straightforward to use and does the expected job.
We use this for workshop maintenance. Arc starts easily with the correct setting. So far the performance has been consistent for normal use.
The product does the basic job, although heavy fabrication needs duty-cycle breaks. I would call the overall experience average rather than excellent.
For fabrication and repair work, this welding machine has been useful. Machine is portable. I am satisfied with it for routine work.
Tried it for workshop maintenance. Arc starts easily with the correct setting. The machine is straightforward to use and does the expected job.
Using this welding machine mainly for workshop maintenance. Arc starts easily with the correct setting. Overall it has been practical for regular work.
Used it for workshop maintenance. The main function is fine, but heavy fabrication needs breaks. It suits normal work better than demanding continuous use.
Tried it for light structural welding. Controls are simple. The machine is straightforward to use and does the expected job. I used it across multiple routine jobs before forming this view.
Bought it for workshop maintenance. Arc starts easily with the correct setting. It saves time and feels suitable for the intended job.
Mainly light structural welding ke liye use kar raha hoon. Controls are simple. Normal daily work ke liye convenient hai aur use karna simple laga.
Performance is acceptable for light structural welding. Cables could be longer, so I would rate it as average rather than excellent.
For workshop maintenance, this welding machine has been useful. Arc starts easily with the correct setting. I am satisfied with it for routine work.
Using this welding machine mainly for light structural welding. Controls are simple. Overall it has been practical for regular work.
Using this welding machine mainly for gate and grill welding. Output feels stable. Overall it has been practical for regular work. I used it across multiple routine jobs before forming this view.
We use this for light structural welding. Controls are simple. So far the performance has been consistent for normal use.
For light structural welding, this welding machine has been useful. Controls are simple. I am satisfied with it for routine work.
For gate and grill welding, this welding machine has been useful. Output feels stable. I am satisfied with it for routine work.
The main job for me is fabrication and repair work. Machine is portable. My only concern is that machine gets warm on long work.
Tried it for light structural welding. Controls are simple. The machine is straightforward to use and does the expected job.
Bought it for fabrication and repair work. Machine is portable. It saves time and feels suitable for the intended job.
Performance is acceptable for routine work. My main complaint is that the holder and earth clamp feel basic. The product is still usable if that limitation is understood.
For gate and grill welding, this welding machine has been useful. Output feels stable. I am satisfied with it for routine work. I used it across multiple routine jobs before forming this view.
Using this welding machine mainly for gate and grill welding. Output feels stable. Overall it has been practical for regular work.
Shop with Confidence
Hassle-Free Warranty
6 Months Complimentary Service Labour. Clear coverage. No confusion.
Lifetime Support
Expert help before and after your purchase.
Free Shipping
Free delivery on every order. Packed safely.
3-Day Initial Issue Support
Quick replacement for defects or transit damage.
Authorized & Genuine
100% genuine products sourced from trusted brands.
Secure Payments
Multiple secure payment options available. UPI, Cards &more
