XLNT 48V Cordless Drill and Angle Grinder Combo Kit

The XLNT XTCOM1372 48V Cordless 2-Tool Combo Kit combines a cordless drill driver and a 125mm cordless angle grinder in one portable power-tool package. It is designed for users who require drilling, screw-driving, cutting and grinding capability without depending on a continuous electrical cable.

The kit is suitable for workshops, fabrication work, installation jobs, repair tasks, construction maintenance and home improvement. Its cordless design allows both machines to be used in locations where direct electrical access may be inconvenient.

The supplier image lists a voltage of 48V and shows multiple removable battery packs, a compatible battery charger and a carrying case. The exact battery quantity and capacity should be confirmed from the supplied package before publication.

120Nm Cordless Drill Driver

The drill included in the XLNT XTCOM1372 has a supplier-listed maximum torque of 120Nm.

Torque represents the rotational force available for drilling and fastening. Actual performance will depend on:

• Fastener size
• Screw condition
• Drill-bit type
• Material hardness
• Battery charge
• Selected speed
• Working technique
• Accessory condition

The 120Nm figure should be presented as the supplier-listed maximum torque rather than guaranteed output in every application.

The drill is suitable for compatible screw-driving, installation and drilling work when the correct bit is fitted.

Dual-Speed Drill Operation

The supplier image lists the drill speed as:

550 RPM / 2350 RPM

These two ranges indicate a dual-speed operating system.

The lower speed range can support controlled fastening and higher-torque work. The higher speed range can be used for suitable drilling applications where faster rotation is required.

Users should begin at a controlled speed while positioning a drill or driver bit. Speed can then be increased according to the material and job requirement.

10mm Listed Drill Diameter

The supplier image states:

Drill Diameter: 10mm

This should be published as:

Listed Drill Diameter: 10mm

The supplier image does not clearly state whether 10mm refers to chuck capacity or maximum drilling capacity. Avoid specifically calling it a 10mm chuck until the physical tool or manual confirms this.

Separate drilling capacities for wood, metal, plastic or masonry are not provided and should not be added without verification.

Cordless Drill for Fastening and Installation

The drill driver can be considered for compatible work such as:

• Driving and removing screws
• Furniture assembly
• Cabinet installation
• Installing brackets
• General repair work
• Light construction installation
• Workshop maintenance
• Suitable drilling tasks
• Home improvement projects

The correct bit should always be selected according to the material and fastener.

The supplier image does not confirm hammer-drilling or impact-drilling functionality. The machine should therefore be described as a drill driver until those modes are officially verified.

125mm Cordless Angle Grinder

The second machine in the combo is a cordless angle grinder designed for a 125mm disc.

A 125mm angle grinder can support compatible cutting, grinding, deburring and surface-preparation work when fitted with the correct accessory.

Different grinder discs are intended for different applications. Users should choose an accessory based on:

• Disc diameter
• Spindle compatibility
• Speed rating
• Material
• Cutting or grinding application
• Accessory condition

Never install an oversized disc or an accessory that is not rated for the grinder’s operating speed.

M14 Spindle Thread

The supplier image lists an M14 spindle thread for the angle grinder.

The spindle specification helps users identify compatible flange components and accessories. However, a disc must also match the 125mm diameter and confirmed speed rating.

The battery should be removed before fitting, removing or adjusting any grinder accessory.

Ensure the disc is centred, securely installed and free from cracks or damage before operating the machine.

Grinder Speed up to 10,000 r/min

The supplier image lists the grinder speed as:

10,000 r/min

This speed range supports compatible metal-cutting, grinding, finishing and surface-preparation applications.

The grinder should be allowed to reach operating speed before contacting the workpiece. Excessive pressure should be avoided because it can slow the disc, increase heat and place unnecessary load on the machine.

The supplier image does not confirm whether grinder speed is adjustable. Avoid claiming variable-speed control unless a dedicated adjustment control is verified.

Auxiliary Handle for Grinder Control

An auxiliary side handle is shown fitted to the cordless angle grinder.

The handle allows two-handed operation and can help improve stability and control while cutting or grinding.

The side handle should be tightened securely before use. Users should maintain a balanced working position and keep both hands away from the rotating accessory.

A suitable safety guard should always be fitted during grinder operation, even though the supplier image does not separately list it in the specification panel.

Cordless 48V Battery Operation

Both machines are shown using removable 48V battery packs.

Cordless operation gives users more freedom while working in garages, workshops, construction sites, outdoor areas and locations without convenient power sockets.

Battery runtime will depend on:

• Battery capacity
• Battery condition
• Tool being used
• Torque or cutting demand
• Disc or drill-bit condition
• Frequency of operation
• Working temperature

The supplier image does not provide an amp-hour rating. Do not publish 4Ah, 10Ah, 15Ah or another capacity without checking the battery label.

Battery Packs Shown

The supplier image visually shows multiple battery packs.

Two batteries appear fitted to the machines, while two additional loose packs are displayed near the charger. Confirm whether all four batteries are supplied or whether the image represents different package configurations.

Until confirmed, the safest wording is:

Multiple removable battery packs shown; exact supplied quantity depends on confirmed package contents.

Battery Charger Included

A compatible charger is shown with the combo kit.

Only the approved charger should be used with the supplied batteries. Charging should be carried out in a dry and ventilated location away from excessive heat, moisture and flammable materials.

The supplier image does not confirm:

• Charging time
• Fast-charging capability
• Charger input voltage
• Battery indicator system
• Battery-cell chemistry

These claims should not be added without official confirmation.

Carrying Case for Storage and Transport

A hard carrying case is shown with the XLNT XTCOM1372.

The case helps organise the drill, grinder, batteries and charger during transportation and storage.

Before placing the tools inside the case:

• Switch off both machines
• Remove the batteries
• Allow accessories to cool
• Clean loose dust and debris
• Secure the grinder disc or remove it
• Keep batteries away from metal objects

The exact case layout and storage capacity should be checked from the supplied package.

Suitable Applications

The XLNT XTCOM1372 can be considered for:

• Drilling suitable materials
• Driving and removing screws
• Furniture and cabinet assembly
• Installation and repair work
• Metal cutting with a compatible disc
• Surface grinding
• Weld finishing
• Deburring metal edges
• Fabrication work
• Workshop maintenance
• Construction-site repair
• Home improvement projects
• General cordless power-tool work

Actual suitability depends on the battery condition, selected accessory, material and operating technique.

Safety and Operating Guidance

Wear suitable eye protection, gloves, hearing protection and protective clothing while using either machine.

Remove the battery before changing drill bits, driver bits, grinder discs or other accessories.

Inspect the tools, batteries, charger and accessories before every use. Do not use cracked discs, bent drill bits, damaged batteries or loose attachments.

While using the angle grinder, direct sparks away from the operator, electrical equipment and flammable materials.

Secure the workpiece whenever possible and maintain a firm two-handed grip during cutting, grinding and demanding drilling work.

Key Features

48V supplier-listed cordless platform

Two-tool cordless combo kit

Cordless drill driver included

Cordless angle grinder included

120Nm supplier-listed drill torque

0–550 RPM low drill-speed range

0–2350 RPM high drill-speed range

10mm listed drill diameter

125mm grinder disc diameter

M14 grinder spindle thread

0–10,000 r/min grinder speed

Multiple battery packs shown

Compatible battery charger shown

Hard carrying case shown

Grinder auxiliary side handle shown

Suitable for drilling and screw driving

Suitable for compatible cutting and grinding

Portable cordless operation

Suitable for workshop and repair jobs