XLNT 125mm Pneumatic Sander Without Hose, 90 PSI – 313-5

XLNT Pneumatic Sander 313-5 is an air-powered sanding tool designed for professional wood, metal and automotive surface preparation. The current product page lists a 125mm pad, 5mm orbit and a 90 PSI air-pressure requirement.

Its compact profile supports convenient handling during workshop sanding, paint preparation and finishing work. The machine requires a compatible air compressor, air hose and suitable air fittings, which should be selected according to the verified airflow and inlet specifications.

90 PSI Pneumatic Operation

The XLNT 313-5 has a listed air-pressure requirement of 90 PSI. Stable compressor pressure helps the sander maintain consistent operation during suitable sanding tasks.

PSI alone does not confirm compressor compatibility. The tool’s required airflow in CFM or litres per minute must also be verified before recommending a compressor. A compressor that reaches 90 PSI but cannot supply enough continuous airflow may cause speed loss and frequent motor cycling.

125mm Sanding Pad

The live page lists a 125mm sanding pad, equivalent to approximately 5 inches. This size provides useful surface coverage for professional sanding and finishing applications.

The title also mentions 6-inch use, but the page does not confirm a 150mm pad or separate 6-inch variant. Verify the supplied backing-pad diameter before ordering sanding discs or publishing a 6-inch compatibility claim.

5mm Orbit for Surface Finishing

The listed 5mm orbit supports surface coverage and material removal during compatible sanding work. Actual finish quality will depend on the abrasive grit, sanding mechanism, air supply, applied pressure and workpiece material.

The current page does not explicitly identify the machine as a random-orbital or dual-action sander. Confirm the operating mechanism before adding those terms to the listing.

Compact and Easy-to-Handle Design

The XLNT pneumatic sander is described as having a compact tool profile and easy handling. Its air-powered construction can suit repetitive professional workshop use when connected to a correctly sized compressor and maintained with the appropriate pneumatic-tool lubrication.

Machine weight, body material and vibration level are not currently stated and should be added after verification.

Recommended Applications

• Wood surface sanding
• Furniture preparation
• Metal surface preparation
• Automotive bodywork sanding
• Paint and primer preparation
• Removing suitable surface imperfections
• Workshop finishing work
• General professional sanding

Surface suitability depends on the abrasive, grit, operating speed and material. Test the machine on a small hidden section before completing the full surface.

Wood Sanding Applications

The sander may be used on suitable wood surfaces for smoothing, preparing furniture panels and removing compatible coatings. Always follow the wood grain during finishing stages and choose the abrasive grit according to the required result.

Metal and Automotive Preparation

The page lists metal and automotive sanding among its intended uses. With the correct abrasive, the machine may support paint preparation, primer sanding and surface levelling on compatible automotive and metal components.

Do not sand fuel containers, pressurised components or surfaces contaminated with flammable substances. Use suitable dust extraction and personal protective equipment.

Choosing the Correct Abrasive Grit

• Coarse grit: Faster removal of compatible coatings or surface irregularities
• Medium grit: General smoothing and preparation
• Fine grit: Finishing before paint, polish or coating

Start with the least aggressive grit suitable for the job. Excessively coarse abrasives may create deep scratches that require additional finishing stages.

Air-Compressor Compatibility

This pneumatic sander requires a compressor capable of maintaining the verified pressure and airflow while the tool is operating. Before purchasing or connecting a compressor, confirm:

• Required continuous airflow in CFM or L/min
• Recommended compressor tank capacity
• Air-hose internal diameter
• Air-inlet thread size
• Maximum permitted air pressure
• Lubrication requirements

An undersized compressor may reach 90 PSI initially but fail to maintain the required airflow during continuous sanding.

How to Use the XLNT Pneumatic Sander

1. Inspect the tool, backing pad, abrasive, hose and air fittings.
2. Confirm that the compressor is switched off before connecting the hose.
3. Attach a compatible air connector and securely connect the hose.
4. Install the correct 125mm abrasive disc and align dust holes where applicable.
5. Adjust the regulator to the manufacturer-approved working pressure.
6. Hold the sander firmly and place the pad flat against the surface.
7. Move the tool continuously using light, even pressure.
8. Avoid tilting the pad edge into the surface.
9. Disconnect the air supply before replacing abrasives or performing maintenance.
10. Clean the tool and follow the verified lubrication instructions after use.

Operating and Safety Instructions

• Wear eye protection, hearing protection and a suitable dust mask.
• Use the machine in a well-ventilated area.
• Do not exceed the manufacturer-approved air pressure.
• Never use a damaged air hose, connector or backing pad.
• Secure the workpiece before sanding.
• Keep hands and loose clothing away from the moving pad.
• Disconnect the air hose before changing accessories.
• Do not direct compressed air at people or animals.
• Use suitable dust extraction when sanding hazardous materials.
• Follow the verified pneumatic-tool lubrication schedule.

Package Contents

• 1 × XLNT 313-5 Pneumatic Sander

The air hose is specifically listed as not included. Confirm whether a 125mm backing pad, air nipple, speed regulator, dust-collection accessory, spanner or abrasive discs are supplied before adding them to the package list.

Why Buy from Buybox Tools?