THOR 5kg Demolition Hammer for Concrete and Masonry Breaking

The THOR THDH37 5kg Demolition Hammer is a compact corded breaker designed for concrete breaking, masonry removal, tile-bed removal and general renovation work. Its supplier-listed 2000W rated input provides strong electric power for breaking and chiselling applications where a normal drill or rotary hammer may not provide enough demolition force.

The machine operates on a rated electrical supply of 220V at 50Hz. Its corded electric design provides direct power wherever a suitable electrical connection is available, without requiring batteries or charging time.

The supplier image identifies the THOR THDH37 as a 5kg breaker. This compact breaker classification makes it easier to handle than larger demolition machines while still being suitable for demanding chiselling and surface-removal work.

2000W Electric Demolition Breaker

The THOR THDH37 has a listed rated input power of 2000W. This power rating supports demolition and chiselling work on suitable concrete, brick, block, tile beds and masonry surfaces.

Actual breaking performance will depend on material hardness, surface thickness, chisel type, chisel condition, working angle, electrical supply and operator technique.

Users should allow the hammering mechanism and chisel to perform the breaking work instead of applying excessive body pressure.

Listed 2900 RPM No-Load Speed

The supplier specification image lists a no-load speed of 2900 RPM.

Because demolition hammers are normally evaluated using hammering or impact specifications, this unit should be checked against the product label or official supplier datasheet before being promoted prominently.

Until confirmation, the technical specification should remain:

Listed No-Load Speed: 2900 RPM, as stated by supplier

Do not convert the figure to BPM or IPM without supplier confirmation.

Pointed and Flat Chisels Included

The supplier image shows both a pointed demolition chisel and a flat chisel.

The pointed chisel concentrates the hammering force into a smaller area. It is useful for starting cracks, breaking hard surfaces and working on concentrated demolition points.

The flat chisel spreads the impact across a wider edge. It can be used for suitable tile-bed removal, surface removal, masonry chiselling and renovation work.

The exact chisel length, diameter and shank type are not shown in the supplier image. These measurements should not be added until verified from the physical product.

Auxiliary Side Handle for Better Control

An auxiliary side handle is shown fitted near the front of the machine. This allows the operator to hold the demolition hammer with both hands, helping improve control and positioning during breaking work.

The handle should be tightened securely before operation and adjusted according to the working angle.

A firm two-handed grip is especially important while starting the chisel on hard surfaces or working vertically and horizontally.

Carrying Case for Storage and Transport

A hard carrying case is shown with the THOR THDH37. The case helps organise and protect the demolition hammer and accessories during storage and transportation.

Allow the machine and chisels to cool before placing them inside the case. Remove loose dust from the machine body, ventilation openings and accessories before storage.

Wrench and Spare Carbon Brushes

A wrench is displayed with the supplied accessories. It can be used for compatible maintenance or adjustment work according to the machine’s operating instructions.

Two small spare brush components are also shown. These appear to be replacement carbon brushes, but their inclusion should be confirmed from the physical package before being advertised as guaranteed contents.

Suitable Demolition Applications

The THOR THDH37 can be considered for:

Concrete surface breaking

Brick and block demolition

Masonry chiselling

Tile and tile-bed removal

Plaster and surface removal

Renovation work

Wall chasing and opening work

Floor repair preparation

Construction maintenance

Light-to-medium demolition jobs

The machine is designed for hammering and chiselling. It should not be promoted as a rotary drilling machine unless a rotation or drilling function is separately confirmed.

Safety and Operating Guidance

Wear safety glasses, hearing protection, heavy-duty gloves, protective footwear and a suitable dust mask while operating the demolition hammer.

Inspect the power cable, plug, handles, chuck and chisel before every use. Do not use cracked, bent or excessively worn chisels.

The selected chisel must be locked securely before connecting the machine to power.

Check the work area for concealed electrical wiring, water pipes and gas lines before demolition begins.

The supplier image does not provide a continuous-duty rating. Allow suitable operating breaks and follow the official product instructions to reduce overheating and unnecessary wear.

Key Features

5kg breaker classification

2000W rated input power

220V rated voltage

50Hz rated frequency

2900 RPM listed no-load speed

Corded electric operation

Pointed demolition chisel shown

Flat demolition chisel shown

Auxiliary side handle

Two-handed operating support

Maintenance wrench shown

Spare carbon brushes shown

Hard carrying case shown

Suitable for concrete and masonry breaking

Suitable for tile and surface-removal work

Compact demolition-hammer design