THOR 21V Cordless Rotary Hammer – THCRH81226

The THOR 21V cordless rotary hammer THCRH81226 is a battery-powered SDS Plus drilling and chiselling machine designed for construction, installation, repair and maintenance work. It delivers a listed 2.2J impact energy, 0–1200 RPM no-load speed and 5000 IPM impact rate.

The cordless kit includes two batteries and a charger, helping professionals work in areas where a nearby electrical socket may not be available. Its four-mode operating system supports multiple drilling and chiselling applications, subject to the exact selector modes confirmed by the manufacturer.

2.2J Cordless Rotary Hammer Performance

The THOR rotary hammer delivers a listed impact energy of 2.2 joules. This supports compatible concrete, masonry, brick, drilling and chiselling work when the correct SDS Plus accessory and operating mode are selected.

The product page does not currently publish maximum drilling diameter, material-specific drilling capacity or duty-cycle information. These values should be confirmed before comparing the machine with 20mm, 24mm or 26mm rotary hammers.

0–1200 RPM Variable-Speed Operation

The machine provides a listed no-load speed range of 0–1200 RPM. Controlled starting speed can help the operator position the drill bit accurately before increasing speed during suitable drilling work.

Actual operating speed may vary according to the selected mode, battery charge, accessory diameter, material hardness and pressure applied by the operator.

5000 IPM Impact Rate

A listed impact rate of 5000 impacts per minute supports hammer drilling and chiselling action on compatible surfaces. Use a suitable SDS Plus masonry bit or chisel designed for the intended material and application.

SDS Plus Tool Interface

The THOR cordless rotary hammer uses an SDS Plus tool interface. This allows compatible SDS Plus drill bits and chisels to be fitted without using a conventional keyed chuck.

Standard straight-shank drill bits require a compatible SDS Plus chuck adaptor. Confirm whether an adaptor is included before listing standard drill-bit compatibility.

Four Operating Modes

The product page lists four operating modes and identifies drilling, hammer drilling, demolition and chiselling among the intended uses. The exact mode-selector positions should be copied from the machine or manufacturer manual before publication.

Select the appropriate operating mode only when the machine has fully stopped. Changing modes while the tool is running can damage the internal mechanism.

Dual-Battery Cordless Kit

The package includes two batteries and a charger. A dual-battery kit can reduce downtime by allowing one battery to remain available while the other is charging.

The battery capacity, chemistry, charging duration and replacement-platform compatibility are not currently published. Confirm these specifications from the physical battery and charger labels.

Suitable Applications

• Concrete drilling after capacity verification
• Brick-wall drilling
• Masonry drilling
• Anchor-hole preparation
• Electrical and plumbing installation
• Repair and maintenance work
• Compatible chiselling applications
• Minor tile and plaster removal
• Light renovation work

Designed for Construction and Maintenance Work

The live page positions the THOR cordless rotary hammer for construction professionals and maintenance teams. Cordless operation can be useful for elevated work, remote job sites and maintenance locations where extension cables may be inconvenient.

How to Use the THOR Cordless Rotary Hammer

1. Charge the battery using the supplied charger.
2. Inspect the machine, battery and SDS Plus accessory.
3. Insert the drill bit or chisel fully into the SDS Plus holder.
4. Pull the accessory gently to confirm that it is locked.
5. Select the correct operating mode while the machine is stopped.
6. Hold the machine securely before starting.
7. Begin at a controlled speed and maintain straight alignment.
8. Allow the hammer mechanism to work without excessive pressure.
9. Stop immediately if the accessory jams or the machine overheats.
10. Remove the battery before changing accessories or cleaning.

Safety Instructions

• Wear safety glasses, hearing protection and a suitable dust mask.
• Check walls for hidden electrical cables, water pipes and gas lines.
• Use only compatible SDS Plus drill bits and chisels.
• Do not change the operating mode while the machine is running.
• Secure the work area and maintain stable footing.
• Keep both hands securely positioned during operation.
• Do not force the tool if the bit becomes stuck.
• Allow the drill bit and chisel to cool before touching them.
• Remove the battery before inspection or maintenance.
• Do not expose the batteries or charger to water.

Package Contents

• 1 √ó THOR 21V Cordless Rotary Hammer
• 2 √ó Batteries
• 1 √ó Charger

Confirm whether an auxiliary handle, depth gauge, drill bits, chisels, grease, user manual or carrying case is included before adding these items to the package list.