XLNT 1200W Electric Rotary Hammer for Concrete and Masonry Drilling

The XLNT XTRH110220 1200W Electric Rotary Hammer Drill is a corded power tool designed for drilling applications in concrete, brick, block and masonry. Its 1200W rated input and adjustable speed range of 0–850 RPM make it suitable for construction, installation, renovation and general maintenance work.

The machine operates on a rated electrical supply of 220V at 50Hz. Its corded design provides consistent power wherever a suitable electrical connection is available, without requiring batteries or charging time.

An auxiliary side handle and three drill bits are shown with the machine, providing a practical starter setup for common drilling jobs.

Adjustable Speed from 0–850 RPM

The supplier specification image lists a speed range of 0–850 RPM. This adjustable range gives the operator better control while starting a hole and working on different masonry surfaces.

A lower starting speed can help improve bit positioning before the operator gradually increases speed. Actual drilling performance will depend on the material, drill-bit size, bit condition, applied pressure and operating technique.

The supplier image does not confirm the machine’s impact rate, impact energy or maximum drilling diameter. These specifications should not be added until verified.

Auxiliary Side Handle for Improved Control

The XLNT XTRH110220 includes an auxiliary side handle that allows the operator to hold the machine with both hands.

Two-handed operation can provide better stability and control during demanding drilling applications. The handle also helps the user maintain a balanced working position while drilling horizontally, vertically or at an angle.

The side handle should be fitted securely before operation and adjusted according to the required working position.

Three Drill Bits Shown with the Machine

The supplier image shows three drilling bits supplied with the XLNT rotary hammer. These provide a convenient starting selection for suitable concrete and masonry drilling applications.

The individual drill-bit sizes are not mentioned in the supplier image. Do not publish exact bit dimensions until the physical package or supplier confirms them.

The image does not show chisels. Therefore, chiselling accessories and chiselling applications should not be included in the package contents or FAQs without separate confirmation.

Corded Electric Operation

The XLNT XTRH110220 uses a corded electrical connection. This makes it suitable for work locations where a stable 220V power source is available.

Before use, inspect the power cable, plug, machine body and drill bit for visible damage. Use a properly rated extension cable only when necessary, and keep electrical connections away from water and wet surfaces.

Suitable for Construction and Installation Work

The XLNT 1200W electric rotary hammer can be considered for:

Concrete drilling

Brick drilling

Block and masonry drilling

Wall drilling

Anchor-hole preparation

Electrical installation work

Plumbing installation work

General construction tasks

Home renovation work

Repair and maintenance applications

Always select the correct drill bit for the material and required hole size.

Practical Rotary Hammer for Regular Drilling Tasks

The XLNT XTRH110220 combines a 1200W motor, adjustable 0–850 RPM speed, auxiliary handle and supplied drill bits in a compact corded drilling machine.

It is a practical choice for contractors, electricians, plumbers, installers, maintenance technicians and users who need a rotary hammer for regular concrete and masonry drilling.

Key Features

1200W rated input power

220V rated voltage

50Hz rated frequency

0–850 RPM listed speed range

Corded electric operation

Suitable for concrete and masonry drilling

Auxiliary side handle included

Three drill bits shown

Two-handed operating support

Compact rotary-hammer body

Suitable for construction and installation work

Product box or packaging shown