XMAID 16V Cordless Drill Driver for Home and Workshop Tasks

The XMAID XTMCD-16-1 16V Cordless Drill Driver is a compact battery-powered tool designed for drilling, screwdriving, furniture assembly, installation and everyday maintenance work. Its cordless operation allows users to work conveniently in areas where a direct electrical connection may not be available.

The drill operates on a 16V rechargeable battery platform and has a listed no-load speed range of 650–2000 RPM. This speed range supports controlled drilling and fastening when the correct drill bit or driver bit is fitted.

A listed drilling diameter of 10mm makes the machine suitable for compatible light drilling applications. The exact capacity can vary according to the material, drill-bit type, battery charge and working conditions.

650–2000 RPM Operating Speed

The XMAID XTMCD-16-1 has a listed no-load speed range of 650–2000 RPM.

The operating speed allows the user to perform suitable drilling and screwdriving work according to the accessory and material being used. A controlled trigger operation can help position the bit correctly before increasing speed.

Actual drilling and fastening performance will depend on:

• Battery charge
• Drill-bit or driver-bit type
• Material hardness
• Fastener size
• Accessory condition
• Applied pressure
• Operator technique

The verified information does not separately state low- and high-speed gearbox ranges. Avoid advertising it as a dual-speed drill unless the machine or manual confirms a gearbox selector.

10mm Listed Drilling Diameter

The drill has a listed drilling diameter of 10mm.

Use the correct compatible drill bit according to the material and required hole size. The bit should be fitted securely and checked for damage before starting work.

The available specifications do not confirm separate drilling capacities for wood, metal, masonry or plastic. These material-specific capacities should not be added without further verification.

16V 2Ah Rechargeable Battery System

The XMAID cordless drill uses 16V 2Ah rechargeable batteries.

A 2Ah battery provides portable operation without requiring the drill to remain connected to an electrical socket. Runtime will vary depending on the drilling load, screw size, battery condition and frequency of use.

Two batteries are included, allowing one battery to remain available while the other is being charged or used. This setup can help reduce interruption during home, installation and workshop tasks.

Two Batteries for Extended Convenience

The kit includes two 16V 2Ah batteries.

Having two removable batteries is useful for users completing multiple drilling and fastening jobs. One battery can be charged while the second battery powers the tool.

Batteries should be stored in a dry location away from direct sunlight, excessive heat, water and loose metal objects.

Do not use a battery that is cracked, swollen, overheated or visibly damaged.

Compatible Battery Charger

A compatible battery charger is included with the drill.

Use only the charger intended for the XTMCD-16-1 battery platform. Charge the batteries in a dry, well-ventilated area away from flammable materials and direct sunlight.

Allow a warm battery to cool before connecting it to the charger. Charging time and fast-charging capability are not confirmed and should not be advertised without checking the charger label.

Compact Cordless Design

The XMAID XTMCD-16-1 has a compact pistol-grip body designed for handheld drilling and fastening.

Its cordless construction makes it useful for working:

• Inside cupboards and cabinets
• Around furniture
• On shelves and brackets
• Away from wall sockets
• In confined work areas
• During portable repair tasks

The textured grip helps the user maintain control during operation. The machine should always be held firmly and kept aligned with the screw, fastener or drilling point.

Keyless-Style Chuck

The drill is fitted with a keyless-style chuck that allows compatible bits to be installed without a separate chuck key.

Before operation:

• Remove the battery
• Open the chuck
• Insert the correct bit
• Centre the bit properly
• Tighten the chuck firmly
• Check that the bit is secure

Do not use bent, damaged or incorrectly sized drill bits.

Carrying Case for Storage and Transport

A hard carrying case is included for storing the drill, batteries and charger.

The carrying case helps keep the main components organised and protected during transportation. Before placing the drill inside the case, switch it off, remove loose dust and allow warm batteries to cool.

Store the complete kit in a dry area away from water, excessive heat and direct sunlight.

Suitable Applications

The XMAID XTMCD-16-1 can be used for compatible applications such as:

• Driving and removing screws
• Furniture assembly
• Cabinet installation
• Installing shelves and brackets
• Home maintenance
• Door and window fitting work
• Light drilling applications
• DIY and hobby projects
• General repair work
• Light workshop jobs
• Installation and fastening tasks

Actual suitability depends on the material, accessory, battery condition and workload.

Safe Operating Guidance

Wear eye protection when drilling or working around loose particles.

Inspect the drill, battery, charger, chuck and selected accessory before every use. Remove the battery before changing drill bits or driver bits.

Secure loose workpieces where necessary. Keep hands, clothing and loose objects away from the rotating chuck.

Begin drilling or screwdriving with controlled trigger pressure to reduce slipping and maintain better alignment.

Key Features

16V cordless operation

Two 16V 2Ah rechargeable batteries

650–2000 RPM listed no-load speed

10mm listed drilling diameter

Cordless drill-driver design

Removable battery system

Compatible battery charger

Compact pistol-grip construction

Keyless-style chuck

Hard carrying case

Suitable for drilling and screwdriving

Suitable for furniture assembly

Useful for household repairs

Suitable for installation and DIY work

Portable operation without a power cable