XLNT 850W Angle Grinder for Cutting and Grinding Work

The XLNT XL-3027 850W Angle Grinder is a compact corded power tool designed for compatible cutting, grinding, deburring and surface-preparation applications. Its 100mm or 4-inch disc size makes it suitable for users who need a manageable grinder for workshop, fabrication, repair and maintenance work.

The machine has a listed power rating of 850W and operates on a rated electrical supply of 220V at 50Hz. Its corded construction provides direct power wherever a suitable electrical connection is available, without requiring batteries or charging.

The XLNT XL-3027 also features an M10 spindle thread, an auxiliary side handle and a safety guard. These components help users fit compatible accessories and maintain better control during operation.

100mm or 4-Inch Disc Capacity

The XLNT XL-3027 is designed for a 100mm or 4-inch disc.

The correct disc must be selected according to the intended application. Cutting discs, grinding wheels, flap discs and other accessories have different designs and uses.

Only accessories that match the following should be fitted:

• 100mm or 4-inch diameter
• M10 spindle compatibility
• Machine speed rating
• Intended material
• Intended cutting or grinding application

Never fit an oversized disc or an accessory with a lower permitted speed than the angle grinder.

850W Corded Electric Performance

The grinder has a supplier-listed input power of 850W. This power rating supports suitable everyday cutting, grinding, deburring and fabrication applications.

Actual performance will depend on the selected disc, material thickness, accessory condition, electrical supply and operating technique.

The user should allow the disc to work at its normal operating speed instead of applying excessive pressure. Too much force may reduce cutting efficiency, overheat the accessory and increase unnecessary load on the machine.

M10 Spindle Thread

The supplier image uses the wording “single thread M10.” The clearer technical description for the website is:

Spindle Thread: M10

The M10 spindle specification helps users identify compatible flange components and grinder accessories. The full accessory dimensions should still be checked before installation.

The grinder must be disconnected from the electrical supply before fitting, removing or adjusting a disc.

Auxiliary Side Handle for Better Control

An auxiliary side handle is shown with the XLNT XL-3027. It allows the machine to be held with both hands, supporting improved stability and control during cutting and grinding.

The handle should be fitted securely before operating the grinder. Users should maintain a balanced stance and keep both hands away from the rotating accessory.

Two-handed operation is especially important when starting the machine, working on harder materials or controlling possible kickback.

Safety Guard for Disc Protection

A safety guard is shown with the grinder. The guard helps create a protective barrier between the operator and the rotating disc.

The guard should be installed and positioned according to the working angle before the machine is switched on. It should not be removed simply to gain additional cutting access.

The operator should remain outside the direct line of the rotating disc whenever possible.

Flange Set and Wrench

The supplier image shows flange components used for fitting a compatible disc to the spindle.

A pin-style wrench is also visible. It is used to tighten or loosen the flange nut while installing or removing an accessory.

The machine should always be switched off and unplugged before changing the disc. Ensure the accessory is centred, properly seated and securely tightened before operation.

Suitable Applications

The XLNT XL-3027 can be considered for:

Metal cutting with a compatible cutting disc

Surface grinding

Weld finishing

Deburring sharp metal edges

Removing suitable surface deposits

Fabrication work

Workshop repairs

Maintenance tasks

Preparing metal surfaces

Cutting suitable rods, pipes or sections

Actual suitability depends on the accessory selected and the material being worked on.

Safety and Operating Guidance

Wear safety glasses or a face shield, hearing protection, gloves and suitable protective clothing while using the angle grinder.

Inspect the power cable, plug, safety guard, handle, flange components and disc before every use.

Do not use a disc that is cracked, chipped, wet, bent, expired or incorrectly rated for the machine.

Allow the grinder to reach operating speed before contacting the workpiece. Keep the cable away from the rotating disc and hot material.

Sparks should always be directed away from the operator, electrical cables, fuel, paint, paper, sawdust and other flammable materials.

Key Features

850W rated input power

100mm or 4-inch disc diameter

220V rated voltage

50Hz rated frequency

M10 spindle thread

Corded electric operation

Compact angle-grinder design

Auxiliary side handle

Safety guard

Flange components shown

Pin wrench shown

Suitable for compatible cutting and grinding applications

Suitable for fabrication and workshop tasks

Two-handed operating support