XLNT 2400W Electric Paint and Material Mixer XLPM230
XLNT 2400W Paint Mixer XLPM230 is a heavy-duty electric mixing machine designed for paint, cement, mortar and compatible industrial materials. It combines a 2400W motor, 1200 RPM variable-speed operation, a reinforced gearbox and a listed maximum mixing diameter of 300mm.
The machine is suitable for construction professionals, painters, contractors and industrial users who require more consistent material preparation than ordinary manual mixing.
Powerful 2400W Heavy-Duty Motor
The XLNT XLPM230 is equipped with a listed 2400W heavy-duty motor designed for demanding material-mixing work. Its high power output helps the mixing paddle move through compatible paint, cement-based compounds, mortar and other construction materials.
The maximum batch size and supported material viscosity should be confirmed before use. Avoid loading the machine beyond the manufacturer's approved limits.
1200 RPM Variable-Speed Control
The mixer has a listed no-load speed range of 1200 RPM. Variable-speed control allows the operator to begin at a slower speed to reduce splashing and then gradually increase the speed according to the material consistency.
- Low-speed starting helps reduce splashing
- Gradual acceleration provides better control
- Different speeds support different material consistencies
- Controlled mixing helps produce more uniform preparation
300mm Maximum Mixing Diameter
The product page lists a maximum mixing diameter of 300mm. This should be treated as the supported maximum mixing or paddle diameter stated by the seller.
Confirm the actual diameter of the supplied paddle, spindle thread, mixing-rod length and replacement-paddle compatibility before publishing detailed accessory specifications.
Reinforced Gearbox for Demanding Work
The XLNT XLPM230 is listed with a reinforced gearbox. This supports power transmission from the motor to the mixing rod during demanding mixing applications.
Operators should avoid sudden overload, striking the container with the paddle or using the machine with hardened material around the mixing rod.
Continuous-Operation Ready Design
The product page describes the mixer as continuous-operation ready. The actual duty cycle, maximum recommended operating time and required cooling intervals are not currently published and should be confirmed before making specific continuous-use claims.
Stop the machine if it becomes unusually hot, loses speed, produces excessive vibration or gives off an abnormal smell.
Recommended Mixing Applications
- Interior and exterior paint
- Cement-based compounds
- Mortar preparation
- Wall putty
- Tile adhesive
- Waterproofing compounds
- Skim-coat material
- Repair mortar
- Industrial coatings
- Compatible construction materials
Suitability depends on the material quantity, viscosity, aggregate size and mixing-paddle design. Do not use the machine for materials outside the manufacturer's approved limits.
Benefits of Using an Electric Material Mixer
- Reduces manual mixing effort
- Helps produce consistent material preparation
- Supports faster paint and mortar mixing
- Helps break down lumps in compatible compounds
- Provides adjustable speed for different materials
- Improves repeatability across multiple batches
How to Use the XLNT XLPM230
- Inspect the mixer, cable, plug, paddle and connection point.
- Secure the mixing rod according to the manufacturer's instructions.
- Place the material inside a stable and suitably sized container.
- Insert the paddle into the material before increasing the speed.
- Start at a low speed to reduce splashing.
- Increase the speed gradually according to material consistency.
- Move the mixer steadily through the material without striking the container.
- Reduce the speed before removing the paddle from the mixture.
- Disconnect the machine before changing or cleaning accessories.
- Clean the mixing rod immediately before the material hardens.
Operating and Safety Instructions
- Operate only on a suitable 220V, 50Hz electrical supply.
- Wear gloves, eye protection and safety footwear.
- Keep electrical connections away from water and wet floors.
- Do not operate with a damaged cable, plug or mixing rod.
- Hold the mixer securely with both hands.
- Maintain stable footing during operation.
- Do not touch the rotating paddle.
- Do not exceed the verified material capacity.
- Disconnect the machine before maintenance.
- Do not use it around flammable liquids or explosive vapours.
Package Contents
- 1 XLNT XLPM230 Paint Mixer Machine
- 1 Mixing Rod
- 1 User Manual
Confirm whether assembly tools, spare brushes or additional paddles are included before adding them to the package list.
Warranty
Product Description
Shipping
Seller Information
