DOXS 15kg Demolition Hammer for Concrete Breaking

The DOXS DX1306 15kg Demolition Hammer is a powerful corded breaker designed for concrete breaking, masonry removal, floor demolition and construction-related chiselling work. Its supplier-listed 1650W rated input and 45J impact energy make it suitable for demanding breaking applications where a regular rotary hammer may not provide enough impact force.

The machine operates on a rated electrical supply of 220V at 50Hz. Its corded design provides direct electrical power wherever a compatible power source is available.

The supplier image identifies the product as a 15kg breaker, making it a larger demolition machine intended primarily for downward, floor-level and heavy surface-breaking applications.

45J Impact Energy for Demolition Applications

The DOXS DX1306 delivers a listed impact energy of 45 joules. This impact output is designed to transfer strong striking force through the chisel into concrete, masonry and other suitable demolition surfaces.

It can be considered for breaking applications such as:

Concrete floor breaking

Slab demolition

Masonry removal

Old tile-bed removal

Foundation and surface breaking

Construction renovation work

Wall and block demolition

Civil maintenance work

The actual breaking speed will depend on the hardness and thickness of the material, chisel condition, operating angle and working technique.

1650W Corded Electric Breaker

The demolition hammer has a rated input power of 1650W. It operates through a 220V corded electrical connection with a rated frequency of 50Hz.

Before operation, inspect the electrical cable, plug and machine body for visible damage. Use a properly rated power connection and avoid operating the machine near standing water or exposed wet electrical connections.

A suitable heavy-duty extension cable should be used only when necessary. An undersized or excessively long cable may affect machine performance.

Listed 1800 RPM No-Load Speed

The supplier image lists the machine with a no-load speed of 1800 RPM.

Because the product is a demolition breaker rather than a drilling machine, the correct measurement should be reconfirmed before final publication. Do not automatically change this value to BPM or IPM without supplier confirmation.

Until verified, present it in the technical specification section as:

Listed No-Load Speed: 1800 RPM, as supplied

Dual-Handle Design for Better Machine Control

The DOXS DX1306 has a large rear handle and a front support handle integrated into the machine body. This two-handed arrangement helps the operator maintain better control while positioning the chisel and applying the breaker to the working surface.

Because the machine is identified as a 15kg breaker, users should maintain a balanced stance and allow the impact mechanism to perform the breaking work. Excessive downward force should be avoided.

The machine should be switched off and disconnected from power before adjusting, inspecting or replacing the chisel.

Pointed Chisel for Concrete Breaking

A pointed demolition chisel is clearly shown fitted to the machine in the supplier image. A pointed chisel concentrates the impact force into a smaller area, making it useful for starting breaks, creating cracks and breaking hard concrete or masonry surfaces.

The exact chisel shank size and length are not stated in the supplier image. These measurements should be confirmed before adding them to the website specifications.

Flat chisels, spade chisels or additional accessories should not be listed as included unless they are confirmed from the actual supplied package.

Suitable for Contractors and Construction Work

The DOXS 1650W demolition hammer can be considered for:

Construction contractors

Demolition workers

Civil maintenance teams

Flooring-removal professionals

Building-renovation teams

Masonry workers

Infrastructure maintenance

Concrete repair preparation

General construction breaking work

The machine is intended for demolition and chiselling. It should not be described as a rotary hammer drill unless a drilling or rotation function is officially confirmed.

Safety and Operating Guidance

Always wear safety glasses, hearing protection, heavy-duty gloves, protective footwear and a suitable dust mask while operating the demolition hammer.

Inspect the chisel before use and replace it if it is cracked, bent or excessively worn. Ensure the chisel is properly locked into the chuck before connecting the machine to power.

Avoid using the machine around concealed electrical wiring, water pipes or gas lines unless the work area has been properly inspected.

Take suitable operating breaks according to the manufacturer’s instructions. The supplier image does not provide a continuous-duty rating.

Key Features

15kg breaker classification

1650W rated input power

45J listed impact energy

220V rated voltage

50Hz rated frequency

1800 RPM listed no-load speed

Corded electric operation

HEX demolition-hammer identity on BUYBOX page

Pointed demolition chisel shown

Large rear operating handle

Front support handle

Suitable for concrete and masonry breaking

Designed for demolition and chiselling applications

Suitable for construction and renovation work